• Selection Standards for Medical-Grade Steels for Plastic Molds

  Medical-grade plastic molds are critical components for producing safe, reliable, and high-precision medical devices and consumables. The selection of mold steel must meet strict requirements for bioc

  2026/03/01 Plastic Molds

• Precautions for TPU Plastic Injection Molding

  TPU is a widely used thermoplastic elastomer with excellent elasticity, toughness and wear resistance, making it suitable for seals, handles, rollers, hoses, protective cases and automotive components

  2026/03/01 Injection Mold

• Setting Skills for Holding Time in Gas-Assisted Injection Molding

  Gas?assisted injection molding is widely used for thick?wall, long?strip parts in automotive, home appliances, electronics, and furniture. It reduces clamping force, weight, sink marks, and warpage. H

  2026/03/01 Injection Molds

• Prevention of Thermal Decomposition and Yellowing in PVC Injection Molding

  PVC often suffers from yellowing and degradation during injection molding. The main cause is thermal and oxidative degradation under high temperature, high shear, and long?time heating, which releases

  2026/03/01 Injection Molding

• EVA Foam Injection Molding Process Operation Guide

  Ethylene Vinyl Acetate (EVA) foam injection molding is a specialized process that utilizes the foaming characteristics of EVA pellets to produce lightweight, elastic, and shock-absorbing plastic parts

  2026/02/28 Injection Molding

• Precautions for PPS Plastic Injection Molding

  PPS is a high-temperature engineering plastic with high rigidity, low water absorption, and narrow processing window. It requires strict control of drying, temperature, injection, and cooling to avoid

  2026/02/28 Injection Molding

• How to Select Mold Steel for TPR Products

  TPR is a thermoplastic elastomer with medium fluidity and low corrosion. Mold steel selection depends on hardness, transparency, output, and appearance requirements.Key Requirements for TPR MoldsWear

  2026/02/28 Injection Molds

• Debugging Skills for Unbalanced Ejection in Plastic Molds

  Unbalanced ejection is a common structural issue in injection molds, causing deformation, whitish marks, cracks, sticking, or pin breakage. This guide provides practical on-site debugging methods.Quic

  2026/02/28 Plastic Molds