• Effective Solutions for Injection Molding Sticking

  Injection molding sticking is a common production issue that causes product deformation, breakage, and damage to mold cavities and ejector pins, severely reducing efficiency and yield. Forcing parts l

  2026/04/13 Injection Molding

• Key Points of Drying Process for PA6 and PA66 Before Injection Molding

  PA6 and PA66 are common polyamide engineering plastics with strong hygroscopicity. Insufficient drying before injection molding can easily cause defects such as silver streaks, bubbles, reduced mechan

  2026/04/13 Injection Molding

• How to Improve Poor Venting in Plastic Molds

  Poor venting is one of the most common problems in injection molding. When air and volatile gases produced by heated plastic cannot be discharged smoothly during melt filling, they become trapped in t

  2026/04/11 Plastic Molds

• Methods for Controlling the Injection Molding Cycle

  The injection molding cycle is the complete time from mold closing to the next mold closing, and it directly determines production capacity, energy consumption, and manufacturing cost. A reasonable cy

  2026/04/11 Injection Molding

• Complete Guide to Injection Molding Temperature and Mold Temperature Settings for TPE and TPV

  Thermoplastic elastomers including TPE and TPV are widely used in automotive parts, electronics, daily necessities, sealing components, and handfeel soft-touch products due to their excellent elastici

  2026/04/11 Injection Molding

• Precautions for PFA Plastic Injection Molding

  PFA (perfluoroalkoxy alkane) offers exceptional heat resistance, corrosion resistance, electrical insulation and high purity, making it widely used in semiconductor components, high-purity fluid pipel

  2026/04/10 Plastic Injection Molding

• How to Select Plastic Shore Hardness? Mold Design & Product Application

  Shore hardness reflects the rigidity, toughness, and feel of plastic materials. It directly influences mold structure design, injection parameters, demolding performance, and final product functionali

  2026/04/10 Plastic Molds

• Mold Water Leak Detection and Maintenance

  Injection mold cooling systems directly affect product quality, production stability, and mold service life. Water leakage is one of the most common failures in injection molding. Minor leaks cause po

  2026/04/10 Injection Molding