• How to Calculate Parting Area of Injection Mold

  The parting area of an injection mold is the projected area of the plastic part, runner and gating system on the parting surface between the moving mold and the fixed mold. It is a key parameter for c

  2026/02/14 Injection Mold

• POM Injection Mold Steel Selection Guide

  POM (polyoxymethylene), also known as acetal resin, is a high?crystallinity, high?rigidity engineering plastic. With excellent wear resistance, fatigue resistance and dimensional stability, it is wide

  2026/02/14 Injection Mold

• Mold Steel Selection for PA (Polyamide) Products

  PA (polyamide) materials, including PA6, PA66, glass-filled PA, and flame-retardant PA, have high shrinkage, certain abrasiveness, and may produce corrosive gases during processing.Therefore, mold ste

  2026/02/13 Plastic Molds

• How to Remove Stuck Parts from Injection Molds

  Sticking is a common injection fault where cooled parts fail to release from the cavity or core.Improper handling can scratch cavities, bend ejector pins, or damage inserts.The safe approach emphasize

  2026/02/13 Injection Molds

• Core Functions of Injection Molding Release Agent

  Release agent is an indispensable auxiliary material in injection molding, forming a stable, high?temperature resistant lubricating film between plastic and mold surfaces.It reduces adhesion and frict

  2026/02/13 Injection Molding

• Nitrided Layer Thickness Testing Methods for Mold Steel

  Nitriding is a widely applied surface strengthening treatment for mold steel, significantly improving hardness, wear resistance, fatigue resistance, and corrosion resistance.A high?quality nitrided la

  2026/02/13 Injection Molding

• Micro Injection Molding Process Parameter Optimization

  Micro injection molding is a highly precise processing method widely used in electronic components, medical devices, precision structural parts, and micro-optical components.Compared with traditional

  2026/02/13 Injection Molding

• Troubleshooting Hot Runner Leakage in Plastic Molds

  Hot runner leakage is one of the most costly, disruptive, and dangerous failures in injection molding. It can cause seized molds, burned heaters, damaged manifolds, cracked cavities, and extended unpl

  2026/02/12 Plastic Molds