• Specific Gravity (Density) of PA6

  PA6 (Polyamide 6, Nylon 6) is a semi-crystalline general-purpose engineering plastic with excellent toughness, wear resistance and self-lubrication. Its basic density is less affected by crystallinity

  2026/02/03 Plastic Molds

• Specific Gravity (Density) of PA66

  PA66 (Polyamide 66, Nylon 66) is a semi-crystalline general-purpose engineering plastic with superior strength, rigidity, heat resistance, wear resistance and self-lubrication compared with PA6. Its b

  2026/02/03 Injection Molding

• Specific Gravity (Density) of EVA

  EVA (Ethylene-Vinyl Acetate Copolymer) is a thermoplastic resin copolymerized from ethylene and vinyl acetate, with excellent flexibility, toughness and low temperature resistance. Its density varies

  2026/02/03 Plastic Molds

• Specific Gravity (Density) of TPR

  TPR (Thermoplastic Rubber) is a thermoplastic elastomer based on SBS, with flexible formulation and outstanding soft touch. Its density varies widely with hardness and filling system, and obvious diff

  2026/02/03 Injection Molding

• Specific Gravity (Density) of TPE

  TPE (Thermoplastic Elastomer) is a class of polymer materials combining rubber elasticity and thermoplastic processability, with flexible formulation systems. Its density varies widely with substrate

  2026/02/03 Injection Molds

• Specific Gravity (Density) of TPU

  TPU (Thermoplastic Polyurethane) is a thermoplastic elastomer material combining elasticity and processability, with a wide hardness range and outstanding oil and wear resistance. Its basic density va

  2026/02/03 Plastic Molds

• Specific Gravity (Density) of PPS

  PPS (Polyphenylene Sulfide) is a highly crystalline specialty engineering plastic with excellent high temperature resistance, flame retardancy and chemical corrosion resistance.Its basic density range

  2026/02/03 Injection Mold

• Specific Gravity (Density) of PC

  PC (Polycarbonate), commonly known as bulletproof plastic, is an amorphous, highly transparent engineering plastic with a stable basic density range unaffected by crystallinity, and the density of gen

  2026/02/03 Injection Molds