• Specific Gravity (Density) of PPS

  PPS (Polyphenylene Sulfide) is a highly crystalline specialty engineering plastic with excellent high temperature resistance, flame retardancy and chemical corrosion resistance.Its basic density range

  2026/02/03 Injection Mold

• Specific Gravity (Density) of PC

  PC (Polycarbonate), commonly known as bulletproof plastic, is an amorphous, highly transparent engineering plastic with a stable basic density range unaffected by crystallinity, and the density of gen

  2026/02/03 Injection Molds

• Density of POM (Polyoxymethylene)

  The density (specific gravity) of POM resin is an industry-recognized standard physical parameter. Commonly known as acetal, it is a highly crystalline engineering plastic with stable base density val

  2026/02/02 Injection Molds

• Density of PA (Polyamide/Nylon)

  The density (specific gravity) of PA resin is an industry-recognized standard physical parameter. Commonly known as nylon, it is the most widely used crystalline engineering plastic, with PA6 and PA66

  2026/02/02 Plastic mold manufacturer

• Density of PMMA (Polymethyl Methacrylate)

  The density (specific gravity) of PMMA resin is an industry-recognized standard physical parameter. Commonly known as acrylic, it is a highly transparent amorphous engineering plastic with stable base

  2026/02/02 Injection Molding

• Density of PBT (Polybutylene Terephthalate)

  The density (specific gravity) of PBT resin is an industry-recognized standard physical parameter. As a general-purpose engineering plastic with fast crystallization and excellent moldability, it has

  2026/02/02 Plastic mold manufacturer

• Density of PET (Polyethylene Terephthalate)

  The density (specific gravity) of PET resin is an industry-recognized standard physical parameter. As a crystalline engineering plastic, it has stable base density values tested in accordance with int

  2026/02/02 Plastic Molds

• Density of PS (Polystyrene)

  The density (specific gravity) of PS resin is an industry-recognized standard physical parameter, divided into two main categories—GPPS and HIPS—with stable base density values tested in accordance wi

  2026/02/02 Injection Mold